Interior painting can be an unnecessarily overcomplicated procedure. Fortunately, it does not have to be a tediously convoluted affair. This chronological guide details how to paint a room in the most efficient way possible, without experiencing any sacrifices of quality.

Move Furniture and Cover Flooring

Any surface that needs to be protected from accidental paint must be relocated or shielded. If furniture cannot be transplanted into a different space, it should at least be placed in the center of the room. When it has been moved to the middle of the painting area, it can be covered with a protective plastic sheet. This same material should also be used to protect the floor, whether there is carpeting or panels.

Tape Off Corners and Apply Primer

To maintain neatness, every narrow edge should be lined with tape that is specifically designed for this purpose. This will guard against sloppy overlaps, and allow for a fine-tuned touch-up afterward to achieve delicate perfection. Once everything is properly lined, primer should be applied to every part of the room that will be painted. This is necessary to let the paint completely bond with the walls, and to prevent the colors underneath from showing through in the final product.

Apply the First Coat of Paint

When the primer has completely sealed, it is time to finally apply the first layer of paint. The Learning Channel has some excellent tips on various brushing methods that can be used, but the most important part of the process is an emphasis on even distribution. It is crucial for the first coat of paint to have a smooth lacquer, because this will negate any chances of protruding malformations in the surface.

Get the Ceiling and Trim

In a separate pallet, the base color can be blended with white paint to generate a lighter shade. This mixture can be used on the trim and ceiling. Make sure to save enough for the second coat, because it can be challenging to replicate precisely. This overlooked step of how to paint a room is the key to professionalism.

Put Down the Second Coat of Paint

When enough time has elapsed for drying, repeat the painting process. Target the areas that are lighter than other parts, and keep everything flat. The right amount of paint will depend on the surface material. Once everything is thoroughly covered, the room should be extensively ventilated. This will allow for maximum dryness. If this regimen is too much to keep track of, then contact CarePro Painting for complete assistance.  Our professional painters can paint any commercial building or room you need.

Leave a Reply